Gossen Digipro F Manuel d'utilisateur télécharger pdf (Page 9)

GOSSEN Foto- und Lichtmesstechnik GmbH 9

CINE scale (frames per second)

Select t with the function buttons – increasing

the shutter speed setting beyond 1/8000 and

preset the CINE speeds with the value buttons

• Measure by pressing the M button

• The measured aperture appears in the

left-hand digital display

Multiple flash

When the light output from a single flash is not

sufficent for you to work at the aperture desired, the

Digipro F is able to automatically calculate the

necessary number of flashes:

(desired aperture e.g.: F4 = 4 flashes)

• Press value button t

Battery

1,5 V Mignon Typ AA (alkali-manganese)

• Attention to warning BAT – change battery

Digipro F

Brief Instructions

Socket to connect

the synchronising

cable

Measuring button M

Buttons to adjust the

values

Swivel head

Display

Buttons to select

the required

function

Ambient light measurement

Shutter priority mode

• Select t with function buttons and set desired

shutter speed with value buttons

• Measure by pressing the M button

• The measured aperture appears

Contrast measurement

• Select t with the function buttons

• Keep the M button depressed while aiming the

meter at various areas of the subject

• After the measuring button is released, the

entire measured contrast range is displayed on

the analog aperture scale

Aperture priority mode

• Select f with the function buttons and set the

desired aperture with the value buttons

• Measure by pressing the M button

The measured shutter speed appears in the

right-hand digital display

Exposure value

• Select EV with the function buttons

• Measure by pressing the M button

• The measured exposure value appears in the

left-hand digital display

Setting the film speed

Select ISO with the function buttons and set the

required ISO value with the value buttons

Measuring function

Flash readings

• Readings can be taken with or without

synchronising cable

• Select with the function buttons

Adjust the desired synchronising speed with

the value buttons

(1 s to 1/1000 s; including 1/90)

• Press the measuring button M and trigger the

flash

• The measured aperture stop appears in the left

digital display and as a flashing mark on the

analog aperture scale. The aperture stop for

the level of ambient light is additionally

indicated on the analog aperture scale

1 2 3 4 5 6 7 8 9 10

Digipro F 1

Commentaires sur ces manuels

Pas de commentaire